Zscale Monster Trains
ZSM HomeContact Zscale Monster TrainsAbout ZSMShippingLinksGift CertificatesOrdering Info
Z ScaleNn3SearchSpecialsLost N
Woodland Scenics   • Woodland main menu
  • Back to Z Sitemap
  • Email for help
Congress enacted the Consumer Product Safety Improvement Act of 2008 and we must now note that these ARE NOT TOYS, AND ARE NOT INTENDED FOR USE BY CHILDREN UNDER AGE OF 14. These products are Model Railroad Equipment and Accessories intended for use by adults.
Woodland Scenics
About Just Plug™ Lighting System:




No electrical knowledge or special tools needed...just plug and you're done!
The Just Plug™ Lighting System is a quick and easy way to add realism and interest to new and existing layouts and other projects. Individual bulb brightness can be controlled, and the modular design allows for easy expansion.
Just Plug is compatible with DCC and works for any scale.
Just Plug™ Lighting System
Watch the Video!
Just Plug™ Lighting System
No electrical knowledge or special tools needed...just plug and you're done! The Just Plug™ Lighting System is a quick and easy way to add realism and interest to new and existing layouts and other projects. Individual bulb brightness can be controlled, and the modular design allows for easy expansion. Just Plug is compatible with DCC and works for any scale. For more information, view the Just Plug video!
#WOO-SOLGT   LED Stick-On Lights
• Operating current: 25mA
• Simply plug into Light Hub
• 2 lights with 24" (60.9 cm) cable/pkg
      $10.99 retail ea. • $8.79
Instructions:


Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Remove release paper from back of Light and stick on desired location.
#5736

Orange
#5737

Green
#5738

Blue
#5739

Red
#5740

Warm White
#5741

Cool White
#5742

Yellow
#WOO-NALGT   LED Nano Lights
• Operating current: 20mA
• Small in size, big in brightness!
• Simply plug into Light Hub
• 2 lights with 24" (60.9 cm) cable/pkg
      $10.99 retail ea. • $8.79
Instructions:


Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Glue or tape Light in the desired location.
#5743

Warm White
#5744

Yellow
#5745

Red
#5746

Green
#5747

Blue
#5748

Cool White
#5749

Orange
#WOO-NALGT   LED Nano Lights
• Flashing LED Nano Lights
• Operating current: 30mA
• Small in size, big in brightness!
• Simply plug into Light Hub
• 2 lights with 24" (60.9 cm) cable/pkg
      $12.99 retail ea. • $10.39
Instructions:


Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Glue or tape Light in the desired location.
#5754

Yellow
#5755

Red
Flashing LED Nano Lights!
#WOO-5956/5957   LED Spotlights
• Two Spotlights Per Package
• Small: 6.1mm W x 15mm L
• Large: 8.1mm W x 15mm L
• 2 lights with 36" cable/pkg
      $10.99 retail ea. • $8.79
Instructions:


Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Glue or tape Light in the desired location.
#5956

Small
#5957

Large
LED Spotlights!
#WOO-5958   LED Floodlight
• Two Floodlights Per Package
• Small: 6.1mm W x 15mm L
• 2 lights with 36" cable/pkg
      $10.99 retail ea. • $8.79
Instructions:


Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Glue or tape Light in the desired location.
#5958

Floodlights
LED Floodlights!
#WOO-5680   Sequencing Light Hub
• 1 x Sequencing Light Hub
• 1 x Double-sided Mounting Tape
• 2 x Mounting Screws
• 1 x CTRL Port Plug
• 1 x Illustrated Instructions
      $25.99 retail ea. • $20.79
Instructions:
Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Details:
Bring your layout to life with a Sequencing Light Hub. Add up to four Just Plug lights that individually sequence on and off. Includes dimmer and speed controls. Turn sequencing off to use as a Light Hub. Add an optional Auxiliary Switch for convenient operation.       3-3/8" W x 1-5/16" H x 7/8" D
View full PDF instructions: Click here
Powering Your Light System:
You will need one Just Plug Power Supply (5770) to power up to 50 lights on your light system, or if you want to power your system from a train power pack, purchase Connecting Cables (5760).
#WOO-5681   Port Sharing Device
• 1 x Port Sharing Device
• 1 x Double-sided Mounting Tape
• 1 x Connecting Cable with Female Plugs, 6"
      $9.99 retail ea. • $7.99
Details:
Use the Port Sharing Device with a Light Hub or Sequencing Light Hub to add up to four Stick-On or Nano LED Lights per Light Port.       5/8" W x 1-1/4" H x 1/2" D
View full PDF instructions: Click here
Advantages:
Whether you're adding lights to a pre-existing building or trying to keep your wires looking neat, Just Plug has everything you need.
#WOO-5682   Battery Case
• 1 x Battery Case
• 1 x with 24" Connecting Cable (Female Plug)
            Not included: Two 9-Volt batteries
      $6.99 retail ea. • $5.59
Details:
Use as an alternative to the Just Plug Power Supply to power Light Hubs, Sequencing Light Hubs and Expansion Hubs.
View full PDF instructions: Click here
Advantages:
Whether you're adding lights to a pre-existing building or trying to keep your wires looking neat, Just Plug has everything you need.
#WOO-5683   Extension Wire
• 1 x 50 ft (15.2 m) wire
      $9.99 retail ea. • $7.99
Details:
Extension Wire is Just Plug-compatible and has soft insulation for easy stripping. Paired wire is color-coded for proper connection with Splicer Plugs and Extension Cable Kit.
View full PDF instructions: Click here
Advantages:
Whether you're adding lights to a pre-existing building or trying to keep your wires looking neat, Just Plug has everything you need.
#WOO-5684   Extension Cable Kit
• 2 x Splicer Plugs
• 3 x 12" Pigtail Wire with Male Plug
• 3 x 12" Pigtail Wire with Female Plug
      $7.99 retail ea. • $6.39
Details:
Use with Extension Wire to create custom lengths of Just Plug Cables. Reach Hubs anywhere on your layout or project.
View full PDF instructions: Click here
Advantages:
Whether you're adding lights to a pre-existing building or trying to keep your wires looking neat, Just Plug has everything you need.
#WOO-5685   Linker Plugs
• 6 x Splicer Plugs
• 6 x 12" Pigtail Wire with Female Plug and
         in-line resistor
      $9.99 retail ea. • $7.99
Details:
Ready to plug into a port on a Light Hub or Sequencing Light Hub. Use to plug in remotely located Street and Wall Mount Lights.
View full PDF instructions: Click here
Advantages:
Whether you're adding lights to a pre-existing building or trying to keep your wires looking neat, Just Plug has everything you need.
#WOO-5686   Splicer Plugs
• 12 x Splicer Plugs
      $4.99 retail ea. • $3.99
Details:
Splicer Plugs make it easy to properly connect paired wires. Use Splicer Plugs to quickly reconnect wires after installing LEDs into discreet, small holes.
View full PDF instructions: Click here
Advantages:
Whether you're adding lights to a pre-existing building or trying to keep your wires looking neat, Just Plug has everything you need.
#WOO-5700   Lights & Hub Set
• 1 x Light Hub
• 2 x Warm White LED Stick-On Lights
• 1 x Double-sided Mounting Tape
• 2 x Mounting Screws
• 1 x CTRL Port Plug
      $20.99 retail ea. • $16.79
Instructions:
Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Details:
All you need is power! This is the quickest and easiest way to add lights to any project. Set includes two warm white LED Stick-On Lights. Use the individual dimmer controls to regulate light brightness. Add an optional Auxiliary Switch for convenient operation. RoHS compliant.
View full PDF instructions: Click here
Powering Your Light System:
You will need one Just Plug Power Supply (5770) to power up to 50 lights on your light system, or if you want to power your system from a train power pack, purchase Connecting Cables (5760).
#WOO-5701   Light Hub
• 1 x Light Hub
• 1 x Double-sided Mounting Tape
• 2 x Mounting Screws
• 1 x CTRL Port Plug
      $17.99 retail ea. • $14.39
Instructions:
Align locking tabs on Light Plug with front of Light Hub (#5700, 5701) and insert into Light Port until locking tabs click into place.
Details:
Add up to four Just Plug LED lights of your choice to a project quickly and easily. Regulate light brightness with individual dimmer controls. Add an optional Auxiliary Switch for convenient operation.
View full PDF instructions: Click here
Powering Your Light System:
You will need one Just Plug Power Supply (5770) to power up to 50 lights on your light system, or if you want to power your system from a train power pack, purchase Connecting Cables (5760).
#WOO-5702   Expansion Hub
• 1 x Expansion Hub
• 4 x Connecting Cables 48" each
• 1 x Double-sided Mounting Tape
• 2 x Mounting Screws
• 1 x CTRL Port Plug
      $16.99 retail ea. • $13.59
Details:
Use the Expansion Hub to connect up to 4 Light Hubs, expanding your Just Plug Lighting System quickly and easily. Includes four Connecting Cables for connecting Lights Hubs. Add an optional Auxiliary Switch for convenient operation.
View full PDF instructions: Click here
#WOO-5725   Auxiliary Switch
• 1 x Auxiliary Switch
• 1 x Connecting Cables 48" each
• 1 x Double-sided Mounting Tape
• 2 x Mounting Screws
      $10.99 retail ea. • $8.79
Details:
Control lights with the flick of a switch. Rocker style on/off switch plugs into Light and Expansion Hub Ports. Control the power to lights on a Light Hub, an Expansion Hub or control lights on multiple Hubs. Use multiple switches for various lighting configurations. Adhesive-backed for easy mounting. Easy to install into main control panel, if desired.
View full PDF instructions: Click here
#WOO-5760   Connecting Cables
• 2 x 48" Connecting Cables
      $6.99 retail ea. • $5.59
Details:
Easy-to-install cable plugs make connections a snap. Connect Expansion Hubs to Light Hubs, Expansion Hubs to Expansion Hubs and/or connect any Hub to train power pack or DCC system.
#WOO-5761   Extension Cables
• 2 x 48" Extension Cables
      $6.99 retail ea. • $5.59
Details:
Extend the length of any Just Plug Cable.
#WOO-5770   Power Supply
• 1 x Power Supply with 48" Cable
      $24.99 retail ea. • $19.99
Details:
The transformer powers up to 50 lights and connects to Light Hub or Expansion Hub.

• INPUT: 120VAC, 60Hz
• OUTPUT: 16VAC, 1000mA
• UL Listed
View full PDF instructions: Click here
#WOO-5715   Light Diffusing Window Film
• 1 x Diffusing Film (white material) 6" x 36"
• 1 x Window Tint (dark material) 6" x 36"
• 256 x Micro Sticky Spots™ (repositionable)
      $17.99 retail ea. • $14.39
View full PDF instructions: Click here
Details:
Diffuses light evenly throughout when lights are on and eliminates the need for a building interior. It blocks the outside view through the windows of an empty building, while still allowing light to shine through the windows from the inside. Use the optional Window Tint together with Diffusing Film to make windows appear dark when lights are off. Material is easy to apply and Tint and Film will each cover approximately 216 square inches (13.9 sq dm) of window space.
#WOO-5716   Light Block Kit
• 1 x Masking Paint (1 oz)
• 1 x Black Ribbon Putty 1/8" thick x 1/4" w x 4' l
      $17.99 retail ea. • $14.39
View full PDF instructions: Click here
Details:
Keep light inside a structure, where it belongs! Seal all light leaks easily by pressing Ribbon Putty into interior corners and joints. Affix it along the bottom edges of structures to secure building to layout surface and block light from bleeding along foundations. Apply Masking Paint to keep light from glowing through walls and shining through windows. Putty will cover 96 linear inches (243 cm) and Paint will cover 1,200 sq. in (77.4 sq dm).
#WOO-5717   Tidy Wire Kit
• 12 x Wire Mounts 1/2" x 1/2" (1.27 x 1.27 cm)
• 24 x Twist Ties 4 in (10.1 cm)
• 20 x Labels 3/8 in x 2 in (9.5 mm x 5.08 cm)
      $7.99 retail ea. • $6.39
Details:
Install quickly and easily to keep cables secure, tidy and easy to access for expansion. Adhesive-backed Wire Tie Mounts secure cables and Wire Ties bundle cables neatly. Use Labels to identify connections.
Go to:
Back to Main Menu
Back to top

Z Sitemap
ZSM Home
Email for help
The pictures above, and throughout this website, are the property of Zscale Monster Trains. Copying any for retail use is theft.
Many were designed by Zscale Monster Trains for use on this site only.