|
|
#ZTR-270 LED Street Lights
$32.50 retail ea.
|
|
|
Few things bring Z scale scenes to life like street lights, and we’ve just made it easier than ever to bring them to your layout! We solder, twist and heat shrink the extra-fine wires from these lights to our own custom twisted insulated wire. The result is a light fixture that is ready to install.
|
|
|
|
Each light fixture comes with its own Quick Connect wire connector with an inline resistor installed, making these lights become a heck of a lot easier to work with. We also test all lights after our wire assembly is completed.
|
|
|
|
By including the appropriate resistor on the Quick Connect wire assembly rather than the wire connected to the light, you can drill a much smaller hole in your layout, and the bases of the street lights then cover that hole for a slicker appearance. A 3/32" drill bit is suggested, then carefully feed the light’s wire down the hole, connect to the Quick Connect, and plug it in to the Rokuhan A016 or our own Ztrains ZTR-251.
|
|
|
|
Product information:
|
•
|
3 single head streetlights. Each light has a 2’ length of custom twisted wire, stripped at the ends, for easier installation into the Quick Connect plug. We really like this wire as it’s easy to handle, is very flexible and it tends to hold its shape.
|
|
•
|
3 Quick Connect plug with an inline resistor that is Rokuhan A016 / Ztrains ZTR-251 compatible and #4 screws are included if you’d like to permanently attach the Quick Connect plugs to the underside of your layout. These are simple but very effective little wire holders.
|
|
•
|
9 foam-backed adhesive wire clips. These can help in making your wires just a bit more organized under the layout. These will hold in place if applied to a clean, non-porous surface.
|
|
•
|
Alcohol wipes for cleaning non-porous surfaces prior to applying wire clips. Not needed if applying the foam pads to wood or other porous surfaces.
|
|