Zscale Monster Trains
ZSM HomeContact Zscale Monster TrainsAbout ZSMShippingLinksGift CertificatesOrdering Info
Z ScaleNn3SearchSpecialsLost N
Woodland Scenics   • Back to Main Menu
  • Back to Z Sitemap
  • Email for help
Congress enacted the Consumer Product Safety Improvement Act of 2008 and we must now note that these ARE NOT TOYS, AND ARE NOT INTENDED FOR USE BY CHILDREN UNDER AGE OF 14. These products are Model Railroad Equipment and Accessories intended for use by adults.
Foam Incline Products
#WOO-1410   2% Incline Set
  • 4" rise in 16'
  • 2 1/2 in x 24 in
  • Includes 8 sections
  $19.99 retail ea. • $18.99
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes eight sections that rise 4 inches (10.1 cm)
        in a 16-foot (4.87 m) run
• Use flexible foam Inclines to easily change
        track elevations on curves or straights
• Use for smooth transition from one height to another
• View PDF instructions: Click here
Watch the Video
#WOO-1411   4% Incline Set
  • 4" rise in 8'
  • 2 1/2 in x 24 in
  • Includes 4 sections
  $14.99 retail ea. • $14.24
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes four sections that rise 4 inches (10.1 cm)
        in an 8-foot (2.43 m) run
• Use flexible foam Inclines to easily change
        track elevations on curves or straights
• Use for smooth transition from one height to another
• View PDF instructions: Click here
Watch the Video
#WOO-1412   2% Incline Starter Set
  • 0" to 1/2" rise in 2'
  • 2 1/2 in x 24 in
  • Includes 8 sections
  $7.99 retail ea. • $7.59
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes eight sections and each section rises from
        0 in - 1/2 in (0 - 1.27 cm) within 24 inches
• Use flexible foam Inclines to easily change
        track elevations on curves or straights
• Use for smooth transition from one height to another
• View PDF instructions: Click here
Watch the Video
#WOO-1413   4% Incline Starter Set
  • 0" to 1" rise in 2'
  • 2 1/2 in x 24 in
  • Includes 4 sections
  $7.99 retail ea. • $7.59
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes four sections and each section rises from
        0 in - 1 in (0 - 2.54 cm) within 24 inches
• Use flexible foam Inclines to easily change
        track elevations on curves or straights
• Use for smooth transition from one height to another
• View PDF instructions: Click here
Watch the Video
#WOO-1415   3% Incline Starter Set
  • 0" to 3/4" rise in 2'
  • 2 1/2 in x 24 in
  • Includes 6 sections
  $7.99 retail ea. • $7.59
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes six sections and each section rises from
        0 in - 3/4 in (0 - 1.9 cm) within 24 inches
• Use flexible foam Inclines to easily change
        track elevations on curves or straights
• Use for smooth transition from one height to another
• View PDF instructions: Click here
Watch the Video
#WOO-1416   3% Incline Set
  • 4 1/2" rise in 12'
  • 2 1/2 in x 24 in
  • Includes 6 sections
  $19.99 retail ea. • $18.99
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes six sections that rise 4 1/2 inches (11.4 cm)
        in a 12-foot (3.65 m) run
• Use flexible foam Inclines to easily change
        track elevations on curves or straights
• Use for smooth transition from one height to another
• View PDF instructions: Click here
Watch the Video
Foam Riser Products
#WOO-1406   1/2 inch Riser
  • 1/2" x 2 1/2 in x 24 in
  • Includes 4 sections
  $7.99 retail ea. • $7.59
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes four sections
• Easily flexed to form curves
• Generally used with Incline Starters to create
        varying grades on your layout
• Use to run track level to the height of the Risers
• View PDF instructions: Click here
Watch the Video
#WOO-1414   3/4 inch Riser
  • 3/4" x 2 1/2 in x 24 in
  • Includes 4 sections
  $8.99 retail ea. • $8.54
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes four sections
• Easily flexed to form curves
• Generally used with Incline Starters to create
        varying grades on your layout
• Use to run track level to the height of the Risers
• View PDF instructions: Click here
Watch the Video
#WOO-1407   1 inch Riser
  • 1" x 2 1/2 in x 24 in
  • Includes 4 sections
  $9.99 retail ea. • $9.49
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes four sections
• Easily flexed to form curves
• Generally used with Incline Starters to create
        varying grades on your layout
• Use to run track level to the height of the Risers
• View PDF instructions: Click here
Watch the Video
#WOO-1408   2 inch Riser
  • 2" x 2 1/2 in x 24 in
  • Includes 4 sections
  $10.99 retail ea. • $10.44
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes four sections
• Easily flexed to form curves
• Generally used with Incline Starters to create
        varying grades on your layout
• Use to run track level to the height of the Risers
• View PDF instructions: Click here
Watch the Video
#WOO-1409   4 inch Riser
  • 4" x 2 1/2 in x 24 in
  • Includes 2 sections
  $10.99 retail ea. • $10.44
• To install, pin in place with Foam Nails and attach with Foam
        Tack Glue™ or the Low Temp Foam Glue Gun and Glue Sticks
• Inlcudes two sections
• Easily flexed to form curves
• Generally used with Incline Starters to create
        varying grades on your layout
• Use to run track level to the height of the Risers
• View PDF instructions: Click here
Watch the Video
Foam Profile Boards
#WOO-1419   Profile Boards
  • 24 in long x 8 in high
  • Includes 2 Connectors
  • Includes 2 Profile Boards
  $11.99 retail ea. • $11.39
• Trim Profile Boards with the Hot Wire Foam Cutter or a Foam Knife
        and glue in place with Foam Tack Glue™ or the Low Temp Foam
        Glue Gun and Glue Sticks
• Package includes:   2 Profile Boards
                        and 2 Connectors
• Place Boards end-to-end or stack to any height using
        the Connectors
• View PDF instructions: Click here
Watch the Video
Foam Sheets
#WOO-1422   Foam Sheet
  • 12 in x 24 in by Thickness Selected
  • Includes 1 Sheet Per Pkg
• Use for Layout and Diorama Bases
• Build Elevated Areas, Mountains and Terrain
• Glue w/ Foam Tack Glue or Low Temp Glue Gun
#WOO-1422
1/4 inch


  $4.74
$4.99
#WOO-1423
1/2 inch


  $5.69
$5.99
#WOO-1424
1 inch


  $6.64
$6.99
#WOO-1425
2 inch


  $12.34
$12.99
#WOO-1426
3 inch


  $15.19
$15.99
#WOO-1427
4 inch


  $18.04
$18.99
Watch the Video
Foam Related Tools
#WOO-1431   Foam Pencils
  • Includes 2 Red Foam Pencils
  • Includes 2 Black Foam Pencils
  $6.29 retail ea. • $5.98
• Foam Pencils have a special lead designed to draw on foam
        without causing damage
• The pencil colors will not bleed through paint or
          other coverings
• Package includes:
                  • 2 x red pencils
                  • 2 x black pencils
Watch the Video
#WOO-1432   2" Foam Nails
  Includes:
  • 75 Foam Nails
  $6.99 retail ea. • $6.64
• Use Foam Nails to temporarily pin track, foam or
          other products to your layout
• 2" Long
• Package includes 75
Watch the Video
#WOO-1433   Foam Knife
  Includes:
  • Foam Knife w/ 2" Blade
  $8.99 retail ea. • $8.54
• The Foam Knife is ideal for cutting thick pieces of foam
• Comes with a 2-inch replaceable blade
Watch the Video
#WOO-1434   Foam Knife Blades
  Includes:
  • 4 Blades per pkg
  • Each Blade 2" Long
  $6.79 retail ea. • $6.11
• Use with #WOO-1433 Foam Knife
• 4/pkg
Watch the Video
#WOO-1435   Hot Wire Foam Cutter
  • Hot Wire Foam Cutter
  $39.99 retail ea. • $37.99
• The Hot Wire Foam Cutter makes clean, precise cuts, adjusts for
  angled cuts; cuts a path 4.5" wide by 5.5" deep
• It heats instantly and leaves no mess
• Use only special nichrome replacement wire
• Use SubTerrain white foam only to avoid the
        emission of toxic fumes
• 110v - Input: 120VAC and Output: 9VAC, 1300mA.
Watch the Video
#WOO-1436   Replacement Wire
  Includes:
  • Foam Cutter Replacement Wire
  • One Wire
  $3.99 retail ea. • $3.59
• Special nichrome wire retains an even temperature needed
  to cut SubTerrain foam products
• Use only with the Hot Wire Foam Cutter
• length - 48 in (121 cm)3
• gauge - 30 or 0.010 diameter
#WOO-1437 Foam Cutter Bow and Guide
      Includes:
        One Bow
        One Guide
        Handle not included

      $9.49 $9.99 retail ea.


       
The Bow attachment adds versatility to the Hot Wire Foam Cutter and cuts a path 4.5 inches wide by 6 inches deep. Attach the Guide for precise angle cuts.
We recommend using the Foam Cutter Bow & Guide on SubTerrain white foam only.
Handle not included.
#WOO-1444 Foam Tack Glue
      Includes:
        12 fl oz/354mL

      $12.34 $12.99 retail ea.


       
Specially formulated for foam and also effective on wood, cork and Homasote board. Foam Tack Glue is high-tack, non-toxic and water soluble. It dries clear and flexible.
Use as a contact cement whenever bonding two large surfaces.
12 fl oz/354mL
#WOO-1445 Low Temp Foam Glue Gun
      Includes:
        Glue Gun
        Two Glue Sticks

      $16.14 $16.99 retail ea.


       
The Glue Gun, with Low Temp Foam Glue Sticks, operates at a temperature that will not damage foam and it bonds instantly. Bonds to foam, wood, paper, foil and many other craft materials.
110 Volt U.S. household current.
Use only Woodland Scenics Low Temp Foam Glue Sticks (ST1446)
#WOO-1446 Low Temp Foam Glue Sticks
      Includes:
        10 Glue Sticks

      $7.59 $7.99 retail ea.


       
Use with Low Temp Foam Glue Gun. Bonds to foam, wood, paper, foil and many other craft materials.
10" x 3.4" (25.4cm x 1.9cm) - 10/pkg
Go to:
Back to Main Menu
Back to top

Z Sitemap
ZSM Home
Email for help
The pictures above, and throughout this website, are the property of Zscale Monster Trains. Copying any for retail use is theft.
Many were designed by Zscale Monster Trains for use on this site only.