Zscale Monster Trains
ZSM HomeSpecialsContact Zscale Monster TrainsNewsLinksPurchase Info
Z ScaleNn3 ScaleN Scale
  • Congress enacted the Consumer Product Safety Improvement Act of 2008 and we must now note that these ARE NOT TOYS, AND ARE NOT INTENDED FOR USE BY CHILDREN UNDER AGE OF 14. These products are Model Railroad Equipment and Accessories intended for use by adults.
  • Z Scale Micro-Track® features:______________
  • Code 55 nickel silver rails.
  • Prototypically accurate U.S. tie spacing.
  • Authentic and decorated roadbed and ties.
  • Duel Joining System (DJS™) utilizing plastic roadbed joiners and separate rail joiners.
  • DJS™ not shown in some pre production photos.

Micro-Track
#990 40 901 Flex Track Set
(old model #599)
contains 10 sections of Flextrack (12.5 inch long each) and 24 rail joiners
$47.15 retail ea. - ZSM $37.72
#990 40 101 Starter Oval set
$20.95 retail ea. - ZSM $16.76

This set contains (12 pieces):
(1) 110mm power input track
(1) 110mm straight track
(6) R195mm x 30° curved track
(4) R195mm x 45° curved track
#990 40 102 Track Expansion Set
$69.95 retail ea. - ZSM $55.96

This set contains:
(1) 110mm power input track
(1) Left Manual Turnout
(1) 110mm straight track cut for L turnout
(2) R490mm x 13° curved track
(4) R220mm x 45° curved track
(1) 110mm straight track
(1) Right Manual Turnout
(1) 110mm straight track cut for R turnout
(8) R195mm x 45° curved track
#990 40 902 110mm Straight Track
Includes: 12 sections
$20.95 retail ea. - ZSM $16.76
#990 40 903 R195mm x 30° Curved Track
Includes: 12 sections
$23.05 retail ea. - ZSM $18.44
#990 40 904 R195mm x 45° Curved Track
Includes: 12 sections
$23.05 retail ea. - ZSM $18.44
#990 40 905 110mm Straight Feed Track
Includes: 1 section with clips and wire
$4.15 retail ea. - ZSM $3.32
#990 40 906 110mm Straight Uncoupler Track
Includes: 1 section with uncoupler
$4.15 retail ea. - ZSM $3.32
#990 40 908 Road Bed Joiners
Includes: 24 Joiners
$4.15 retail ea. - ZSM $3.32
#990 40 909 Track Bed Rail Joiners
Includes: 24 Joiners. Fits both Roadbed Track and Flex Track.
$4.15 retail ea. - ZSM $3.32

#990 40 910 Left Hand Manual Turnout
(1) Left hand turnout
(1) R490mm x 13° curved track
(1) 110mm straight track
$24.95 retail ea. - ZSM $19.96

#990 40 911 Right Hand Manual Turnout
(1) Right hand turnout
(1) R490mm x 13° curved track
(1) 110mm straight track
$24.95 retail ea. - ZSM $19.96
#990 40 912 R490mm x 13° Curved Track
Includes: 12 sections
$23.05 retail ea. - ZSM $18.44
#990 40 913 R220mm x 45° Curved Track
Includes: 12 sections
$23.05 retail ea. - ZSM $18.44
#990 40 914 Left Hand Remote Turnout
(1) Left hand turnout
(1) R490mm x 13° curved track
(1) 110mm straight track
$29.95 retail ea. - ZSM $23.96
#990 40 915 Right Hand Remote Turnout
(1) Right hand turnout
(1) R490mm x 13° curved track
(1) 110mm straight track
$29.95 retail ea. - ZSM $23.96
#990 40 916 Right / Left Hand Remote Turnout Power Adapter 4-Pack
Fits Right hand and Left hand Manual turnouts.
Four pack.
$24.95 retail ea. - ZSM $19.96
#990 40 917 220mm Straight Track
Includes: 12 sections
$24.95 retail ea. - ZSM $19.96
#990 40 950 Through-Girder Bridge
83’ Undecorated Black
Released Mid-July 2010
$9.95 retail ea. - ZSM $7.96
#990 40 951 Through-Girder Bridge
83’ Undecorated Gray
Released Mid-July 2010
$9.95 retail ea. - ZSM $7.96
#988 00 211 Uncoupler Magnet (2 ea.)
TWO Magnets …
(Old #921)
$5.30 retail - ZSM $4.24
#ATL-2091 Atlas Plastic Joiners (24 per pack)
These are a perfect fit for Z scale track.
These work because they are for the smaller N scale code 55 track; It is a perfect match!
$1.80 retail - ZSM $1.62
#ATL-2092 Atlas Terminal Joiner (1 pair)
These are a perfect fit for Z scale track.
These work because they are for the smaller N scale code 55 track; It is a perfect match!
$3.25 retail - ZSM $2.93
#ATL-56 Atlas Switch Control Box
Used on MTL Remote Turnouts.
$4.75 retail - ZSM $4.28
#ATL-205 Atlas Switch "connector"
Used to turn ON-and-OFF your Track Sidings or Accessories. Couple several of the "connector" for controlling additional items.
$9.75 retail - ZSM $8.78
#ATL-215 Atlas Switch "Selector"
Four single-pole, double-throw, switches used for controlling four blocks. Couple several units for controlling additional blocks.
$9.75 retail - ZSM $8.78
#ATL-220 Atlas Switch "Controller"
Use to control reversing loops, wyes and turntables. Has reversing switches for two mainline cabs, selectable for either cab, for directional control on reversing loops. Can be added to the #215.
$10.25 retail - ZSM $9.23
#500-195 Z Scale MRC Transformer
externally modified by Micro-Trains to oporate Z scale (Micro-Trains or Marklin Locomotives) at the correct voltage …
$44.95 retail - ZSM $40.46
#SL-210 PECO rail joiners (24 pack)
$4.33 retail - ZSM $3.46

sales@zscalemonster.com