Zscale Monster Trains
ZSM HomeContact Zscale Monster TrainsAbout ZSMShippingLinksGift CertificatesOrdering Info
Z ScaleNn3SearchSpecialsLost N
Monroe Models   • Back to Z Sitemap
  • Email for help
Congress enacted the Consumer Product Safety Improvement Act of 2008 and we must now note that these ARE NOT TOYS, AND ARE NOT INTENDED FOR USE BY CHILDREN UNDER AGE OF 14. These products are Model Railroad Equipment and Accessories intended for use by adults.
Z scale kits
Diesel Engine House
#MMO-7219   Diesel Engine House
• Released December 2017
• Undecorated Kit
• Dimensions:
            3-3/4"L x 2-3/16"W x 1-3/16"H
      $34.95 retail ea. • $27.96
In stock!
Product information:
Diesel Engine Houses like this were constructed along railroads at most rail yard facilities. After steam engine roundhouses were retired, diesel engines needed a more modern facility in which to maintain them. These buildings often included door cabinets, supply cupboards, lube oil, sand storage bins, automatic oil burning space heaters, a desk and clothes lockers. This engine house has space for one locomotive and includes the smoke jack vents to exhaust the diesels.
Product Info:
Laser-cut structure kit
Made of premium card stock and fiber board
Laser-etched, simulated metal siding and roofing
Laser-cut windows, doors, and trim all with
      peel-and-stick backing for easy assembly and painting
Lead free cast metal roof vents, smoke jacks
Directions with photos and diagrams for easy
      step by step construction
Scrap Yard Junk Pile Set
#MMO-7104   Scrap Yard Junk Pile
• No longer in production
      $9.99 retail ea.
Not in production
Product Info:
Three Junk Piles as shown
Country Road Bridge
#MMO-7007   Country Road Bridge
• Undecorated Kit
• No longer in production
      $24.95 retail ea.
Not in production
Product information:
Its big, unique and it will be an impressive structure on your railroad. Wood bridges of this type arrived during the mid to early half of the 20th Century and survive in many rural areas today. This bridge is tall enough for double stack containers and wide enough for double tracks. Every board, railing, support and pier in this kit is made of laser cut basswood or micro plywood. Included are "photo" directions which make each step very easy to understand and construct without hours of reading and analyzing. Just follow the pictures to completion
Product Info:
Laser-cut structure kit
Signs for the road overpass
Railroad warning signs for the bridge
Size: 7"L x 1-3/16"W x 1-9/16"H
Merchant Street Bridge
#MMO-7009   Merchant Street Bridge
• Undecorated Kit
• No longer in production
      $27.95 retail ea.
Not in production
Product information:
Based on bridges built in the 1920's & 30's of which many are still in use today. These bridges were made of reinforced concrete with a double track mainline traveling overhead. Many of these bridges were built to eliminate grade crossings and promote safer passage for automobiles & pedestrians in urban areas. Some of these bridges where in a simpler style, ours happens to be in a more ornate style. Complete "photo" instructions are included to make assembly and painting easy and fun!
Product Info:
It is a double track bridge
Made of strong white hydrocal
4 wing walls, 3 piers, 2 part deck
Laser cut material for the side walks
Printed roadway signs for the underpass
Size: 3"L x 4-3/4"W x 1"H
Deck Girder, Highway Bridge
#MMO-7010   Deck Girder, Highway Bridge
• Undecorated Kit
• No longer in production
      $25.95 retail ea.
Not in production
Product information:
Based on bridges commonly found across American railroads from the Early 1900’s to today. Also included are printed signs for the road underpass; and complete illustrated instructions. What else do I need: Super Glue and 150 grit sandpaper for assembly. Water based colors for coloring. For weathering we recommend using a mixture of Rubbing Alcohol and Calligraphy Ink. General modeling tools such as hobby knife, small square, small files, straight edge, etc.
Product Info:
Cast structure kit
Length: 90 scale feet
Included in kit:
Two Piers
Two Abutments
One piece cast box girder span
Size: 5-1/4"L x 15/16"W x 1-1/16"H
Freight Houses (2-Pack)
#MMO-7201   Freight Houses (2-Pack)
• Undecorated Kit
• No longer in production
      $27.95 retail ea.
Not in production
Product information:
Made of Micro Plywood and Basswood parts with solid, tab and slot designed parts. Peel and stick simulated tar paper roofing. Fully illustrated instructions are included.
What else do I need: Super Glue, Wood Glue and sandpaper for assembly. Water based colors for coloring. For weathering we recommend using a mixture of Rubbing Alcohol and Calligraphy Ink. General modeling tools such as hobby knife, small square, small files, straight edge, etc.
Product Info:
Laser-cut structure kit
Structure One: 3” L x 1-1/2” W x 1” H
Structure Two: 2-1/4” L x 1-1/2” W x 7/8” H
Jurgens Junk Yard
#MMO-7204   Jurgens Junk Yard
• Undecorated Kit
• No longer in production
      $29.95 retail ea.
Not in production
Product information:
This is a precision laser cut structure kit. Made of basswood and micro plywood parts. Designed with tabs and slots, plus peel and stick trim for easy and quick construction.
What else do I need: Wood Glue for assembly. Water based colors for coloring. For weathering we recommend using a mixture of Rubbing Alcohol and Calligraphy Ink. General modeling tools such as hobby knife, small square, small files, straight edge, etc.
Product Info:
Laser-cut structure kit
Size: 7"L x 1-3/16"W x 1-9/16"H
Included in kit:
Fence material
Cast resin junk pile
Vintage advertising signs
Ellie's House
#MMO-7205   Ellie's House
• Undecorated Kit
• No longer in production
      $24.95 retail ea.
Not in production
Product information:
You remember Ellie's House. Not far from the tracks and across the street from the depot. As a kid you saw her sitting on the front step or looking out the bay window whenever a train would arrive in town. The kit is based on a Victorian era Gothic House of the late 1800's. It is made of precision laser cut bass wood, and fiber board materials. The roof is etched with simulated cedar shake shingles so no assembly of tiny shingles is required. Now all you need to do is choose Ellie's paint scheme and use wood glue for assembly.
Product Info:
Laser-cut structure kit
Cast metal chimneys
Laser cut window glazing
Peel and stick windows and trim
Etched simulated cedar shake shingles
Go to:
Back to top
Email for help

Z Sitemap
ZSM Home
The pictures above, and throughout this website, are the property of Zscale Monster Trains. Copying any for retail use is theft.
Many were designed by Zscale Monster Trains for use on this site only.