• Simple programming of DCC Addresses with the push of just a few buttons.
• No confusing menus
• Standalone design requires no preexisting DCC System
• 8-pin NMRA decoder slot for use with aftermarket decoders
• Program track output for preinstalled on-board DCC decoders
• Program, read & reset DCC decoders and on-board DCC decoders individually
• Works with all NMRA compliant decoders & locomotives in HO, N and Z scales
• Power supply included
DCC ADDRESS PROGRAMMING MADE SIMPLE!
1. Plug in an 8-pin DCC decoder or place a locomotive on the
Address Changerís program track (or use both the 8-pin and
program track to program, read, reset both decoders at once!).
2. Read the current address, assign a new address or reset the
decoder(s) to factory defaults with a few button presses.
3. No separate DCC system required!