|
|
Directions:
• Using precision cutters, suitable for cutting photo-etched metal parts, cut signs from frame.
• With a 0.5mm - 0.6 mm drill bit, drill hole(s) in the surface of your layout, to mount sign.
• For signs with two mounting posts, attach drilling template to layout surface, drill holes.
• It is recommended to use lasercut glue with a dispensing needle.
• Place glue into the holes and insert the sign posts into the holes.
• Adjust height of sign, using supplied mounting gauge, wait until the glue dries.
• Important: Do not use glues for plastic as they may damage the lacquer coating on some pieces.
|
36 x Traffic Signs:
• 10 x 626-10
• 10 x 626-20
• 4 x 626-30
|
• 2 x 626-11
• 2 x 626-12
• 2 x 626-13
|
• 2 x 626-21
• 2 x 626-22
• 2 x 626-23
|
