Zscale Monster Trains
ZSM HomeContact Zscale Monster TrainsAbout ZSMShippingLinksGift CertificatesOrdering Info
Z ScaleNn3SearchSpecialsLost N
TrainCat   • Back to Z Sitemap
  • Email for help
Congress enacted the Consumer Product Safety Improvement Act of 2008 and we must now note that these ARE NOT TOYS, AND ARE NOT INTENDED FOR USE BY CHILDREN UNDER AGE OF 14. These products are Model Railroad Equipment and Accessories intended for use by adults.
Electrical Transmission Towers
#TC-1000101   Electrical Tower
  • Electrical Transmission Tower
  • Scale Feet = ±90'  • W = 3"  • H = 4.5"
  $39.95 retail ea.
• Common sites paralleling the main lines of today's railroads, although
    varying in heights, most towers are between 60 and 120 feet tall
• Tab & Slot construction allows for a one evening build.
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• Carries six wires suspended from the top bridge
• Also accommodates two wires atop the vertical masts
#TC-1000201   Electrical Tower
  • Electrical Transmission Tower
  • Scale Feet = ±140' tall
  $41.95 retail ea.
• Tower #2 can be found in almost every state carrying up to six wires
    on the mast arms and two wires on the mast head
• Tab & Slot construction allows for a one evening build.
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This model represents a ±140' tall Z scale Tower
    (102' tall N scale) with two different isolator formats
Tankcar Loading Platform
#TC-0000701   40' Platform
  • Tankcar Loading Platform
  • L = 2.33"  • W = .27"  • H = .61"
  $18.95 retail ea. • ZSM $18.95
• This 40' platform is modular where multiple platforms can be grouped
    end-to-end to create any length required for your specific layout
• Movable platform, recessed & swings down to tankcar
• Deckway has supporting structure for 4 delivery pipes
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This is a quick one evening kit with exceptional details
#TC-0000703   50' Platform
  • Tankcar Loading Platform
  $23.50 retail ea. • ZSM $23.50
• This 50' platform is for servicing larger tank cars such as the 23,000
    Gallon Funnel Flow Tankcars by American Z Line
• Movable platform, recessed & swings down to tankcar
• Deckway has supporting structure for 4 delivery pipes
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This is a quick one evening kit with exceptional details
#TC-0000705   Crossover Bridge
  • Loading Platform Crossover Bridge
  $18.95 retail ea.
• This Platform Crossover Bridge connects two rows of Tankcar Platforms
• The kit includes:
            • 2 Small Stands     • Bridge and Railing
            • 1 Large Stand       • 2 Stairs
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• Please see the diagram to your right
#TC-0000707   Crossover Stairs
  • Loading Platform Crossover Stairs
  $18.95 retail ea.
• These Platform Stairs will extend the Loading Platform Crossover Bridge
    that connects two rows of Tankcar Platforms
• The kit includes:
            • 1 Small Stand     • Landing and Railing
            • 1 Large Stand     • 1 Stair
• Kit can be assembled with Solder or Zap-A-Gap CA Glue
• Please see the diagram to your right
#TC-0000709   Platform Shelter
  • Loading Platform Shelter
  $8.95 retail ea. • ZSM $8.95
• This add-on kit can be placed on any of our Tankcar Loading Platforms
• Use to protect the loading of liquids from the weather
• Use with the 40' or 50' Tankcar Loading Platforms
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This kit is a quick one evening kit with exceptional details
Yard Equipment
#TC-0001101   Service Platform
  • Engine Service Platform
  • L = 3.7"  • W = .27"  • H = .425"
  $18.95 retail ea.
• Provisions are in the walkway for railings when used on outer tracks,
    when placed between two tracks the railings can be omitted for access
• Platform made of grated walkway with stairs at each end
• Platform height designed to be at sill top of most engines
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This is a quick kit with exceptional details
#TC-0002601   91ft Yard Light Tower
  • Tapered Yard Light Tower
  • 91 Scale Feet
  $24.95 retail ea.
• Found in the old PRR Yard in Baltimore, MD
• This 91ft tapered yard light tower is a great addition to any layout
• Lighting kits are being developed by
    Richmond Controls and Integrated Signal Systems
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• Simple to build with lots of detail
Picnic Tables
#TC-0001203   Picnic Tables
  • Picnic Tables Kit
  • L = .44"  • W = .31"
  $6.95 retail ea.
• Railfans on your layout need a place to sit, chat with friends and family,
    relax and have a bite to eat while the watching all the action on the rails
• This kit can be used anywhere and in any quantity
• Use in a park setting, at work, also in backyards too
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This is a quick kit with detail
Structures
#TC-0001301   Construction Trailer
  • Construction Trailer Kit
  • L = 3.7"  • W = .27"  • H = .425"
  $19.95 retail ea.
• Made completely of etched brass, the trailer can be built stationary with
    it's own blocks and entry stairs complete with etched diamond tread
• The trailer can be displayed on the move,
        on it's own wheels & hitch
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This trailer is an easy one evening kit w/ nice details
#TC-0001501   Quonset Hut
  • 20ft x 48ft Quonset Hut Kit
  • L = 3.7"  • W = .27"  • H = .425"
  $15.95 retail ea.
• This kit faithfully reproduces the Quonset huts developed during WWII
• The most common design created a standard size
        of 20 by 48 ft (6 by 15 m) with a 10 ft (3 m) radius,
        allowing 720 sq feet (67 mē) of usable floor space
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
• This is an easy one evening kit w/ nice details
Scratch Builder Kits
#TC-0001401   Stairs
  • Industrial Stairs Kit
  • L = 5.5"  • 100' scale
  $13.95 retail ea.
• These tiny and detailed Stairs are etched from very thin brass stock
• Component kits for the scratch builder
• This kit is a continuous length of stairs
• It can be cut to the desired length needed by builders
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
#TC-0001402   Walkway & Railings
  • Industrial Walkway & Railings Kit
  • L = 5.5"  • 100' scale
  $13.95 retail ea.
• These tiny Walkways & Railings are etched from thin brass stock
• Component kits for the scratch builder
• This kit is a continuous length of Walkway & Railings
• It can be cut to the desired length needed by builders
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
#TC-0001410   Caged Ladder
  • Industrial Industrial Caged Ladder Kit
  • L = 2.625"  • Four sections
  $13.95 retail ea.
• These Industrial Caged Ladder are etched from brass sheet stock
• Component kits for the scratch builder
• This kit contains four Industrial Caged Ladders
• It can be cut to the desired length needed by builders
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
Signals & Signal Bridges
#TC-0300101   Cantilevered Bridge
  • C&O / B&O Cantilevered Signal Bridge Kit
  • Signal heads will accommodate 1, 2 & 3 LED's
  $19.95 retail ea.
• Although the Kit does not include working signal heads, TrainCat
    recommends signal heads from Integrated Signal Systems.
• Separately applied X-Bracing
• See-Through Grate Decking
• Riveted Gusset Plates
• Resin base
• This kit is a one evening kit with exceptional details
#TC-0300701   Cantilevered Bridge
  • SP / ATSF Cantilevered Signal Bridge Kit
  • Signal heads will accommodate 1, 2 & 3 LED's
  $19.95 retail ea.
• Although the Kit does not include working signal heads, TrainCat
    recommends signal heads from Integrated Signal Systems.
• Separately applied Z-Bracing
• See-Through Grate Decking
• Riveted Gusset Plates
• Resin base
• This kit is a one evening kit with exceptional details
#TC-0300901   D-Type Mast Signals
  • 4-Pack
  $11.95 retail ea. • ZSM $11.95
• Although the Kit does not include working signal heads, TrainCat
    recommends signal heads from Integrated Signal Systems.
• Comes with 6ea of 1, 2 & 3 light target heads that can
    be customized by the builder for their own application
• Each mast can be built with either one or two platforms
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
Bridges
#TC-0200401   110' Double Thru Plate
  • 110ft Double Thru Plate Girder Bridge Kit
  • L = 6"  • H = .80"
  $89.95 retail ea.
• Our 110ft E75 rated Open Floor Thru Plate Girder Bridge has been faithfully
    reproduced directly from builder plans from American Bridge in 1902
• Over 3400 rivets grace all components from the
    girders to the stringers
• Prototype was used all over the US on many railroads
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
#TC-0200601   110' Single Thru Plate
  • 110ft Single Thru Plate Girder Bridge Kit
  • L = 6"  • H = .80"
  $89.95 retail ea.
• Our 110ft E75 rated Open Floor Thru Plate Girder Bridge has been faithfully
    reproduced directly from builder plans from American Bridge in 1902
• Over 3400 rivets grace all components from the
    girders to the stringers
• Prototype was used all over the US on many railroads
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
#TC-0200801   90' Deck Girder
  • 90ft Single Deck Girder Bridge Kit
  • L = 4.91"  • H = .491"
  $42.50 retail ea.
• For the modeler who wants prototypical details
• Two length bridges are offered
• A 90 foot deck girder with a 9 ft depth
• A 120 foot deck girder with a 10ft depth
• Grated walkways on both sides of the bridge
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
#TC-0200803   120' Deck Girder
  • 120ft Single Deck Girder Bridge Kit
  • L = 6.5"  • H = .545"
  $58.50 retail ea. • ZSM $58.50
• For the modeler who wants prototypical details
• Two length bridges are offered
• A 90 foot deck girder with a 9 ft depth
• A 120 foot deck girder with a 10ft depth
• Grated walkways on both sides of the bridge
• This kit can be assembled with Solder
• Or assemble with Zap-A-Gap CA Glue by Pacer
Not yet in production
Pratt Thru Truss Pin-Connected Double Track

  • This is our fourth bridge project. The prototype bridge is the B&O double track Pratt Truss pin-connected mainline bridge found in Ilchester, MD on the B&O Old Main Line. The bridge is 163 feet in length and capable of permitting double stack traffic. The single track version retained all of the ornate structural details that is found on the prototype. As always, super details are found throughout the bridge including the super-fine grated walkways. Full details will also be found in the floor system.
  • 6 Panels, L=12.25in, H=2.75in
#TC-0200301 Pratt Thru Truss Double Track
$275.95 retail ea. Not yet in production!
Pratt Thru Truss Pin-Connected Single Track

  • This is our fourth bridge project. The prototype bridge is the B&O double track Pratt Truss pin-connected mainline bridge found in Ilchester, MD on the B&O Old Main Line. The bridge is 163 feet in length and capable of permitting double stack traffic. The single track version retained all of the ornate structural details that is found on the prototype. As always, super details are found throughout the bridge including the super-fine grated walkways. Full details will also be found in the floor system.
  • 6 Panels, L=12.25in, H=2.75in
#TC-0200701 Pratt Thru Truss Single Track
$159.95 retail ea. Not yet in production!
Go to:
Back to top
Email for help

Z Sitemap
ZSM Home
The pictures above, and throughout this website, are the property of Zscale Monster Trains. Copying any for retail use is theft.
Many were designed by Zscale Monster Trains for use on this site only.