Why choose Zephyr-Xtra:
- Everything you need to get started in Digitrax Command Control for a great low price.
- Zephyr Xtra is perfect for beginning, intermediate and advanced model railroaders. It is easy to use and has tons of features.
- Zephyr Xtra offers excellent speed control, prototypical consisting, the full range of programming features and much more.
- Zephyr Xtra is a breath of fresh air in model railroading.
- Note: Existing DCS50s/Zephyrs are not upgradable to the new DCS51s/Zephyr Xtras. The DCS51 is a completely new board design with additional keys and additional functionality.
Zephyr Set Includes:
- DCS51 All-In-One Throttle/Command Station/Booster to run your layout
- PS314 Power supply to provide power to run your DCS51
- One LT1 LocoNet Cable & Decoder Test Kit
- Zephyr’s DCS51 is approximately 7.25" wide, 5.5" deep (including rear connector), 2.75" high (including knobs).
- All hook up is in the rear of the unit so, leave plenty of room for wires.
- Note: Digitrax Zephyr Starter Sets does not include mobile decoders.
Zephyr Offers:
- Simple to use controls for running trains.
- Large speed control knob and direction switch with brake.
- Full numeric key pad.
- Easy 2 and 4 digit addressing.
- Smooth speed control.
Run multiple trains at once without blocking!
- Run up to 20 addresses at the same time on your system.
- Run up to 20 throttles at the same time on your system.
Jump Ports for using DC power packs as additional throttles:
- Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
- Simple, cost effective way to add more throttles to your Zephyr set.
- Makes it easy to share the fun of DCC with layout visitors and young operators.
- Functions on locos controlled by Jump throttles remain active.
Over 9000 Locomotive Addresses:
- Use Address 00 to run one or more locos without DCC decoders.
- Two Digit Addressing is easy to use. (Address 01-127).
- Four Digit Addressing-use the number painted on your engines as its address.
3 Amps of Power to run multiple trains:
- Booster outputs 13V for safe operation in N and HO scales.
Function Control:
- #Control 29 functions-F0 through F28.
- Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
- Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Stationary Decoders, Turnout Control & Turnout Position Reporting:
- Access to stationary decoder control for turnouts and other devices.
- Control 999 stationary decoder addresses.
Consisting:
- Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
- Advanced consisting, allows only advanced consist capable mobile decoders.
- Basic consisting, program decoders to run on same address.
Decoder Programming:
- Built in read/write programmer that can read and write all CVs.
- Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
- Operations mode programming can be used to program decoders on the layout.
Expandability with Digitrax LocoNet:
- Use Zephyr Xtra as a starting point for your Digitrax LocoNet System, then add components.
- Use Zephyr Xtra as an expansion set with Digitrax equipment you already have installed.
- Add Radio or IR via LocoNet. Just plug in a UR90 or UR91 receiver and add IR and/or Radio throttles.
|